AMETEK CTS Automotive Transient Immunity Testing
1.00 25 / 26
5.5.1. Tests with clamps and other couplers.
Be aware that coupling clamps, as defined by the standard, must be connected and usually adjusted due to
losses. These shall be used only in compliance with the standard.
WARNING
WARNING: Coupling clamps are dangerous to touch and must not be approached during the
test run!
5.5.2. Verification Accessories
Consult the datasheet for verification accessories. Only genuine AMETEK CTS and EM Test accessories are
supported. Consult the standard for proper usage and when verification must take place.
To Next Page
Loading...
Need help?
General
