Ametek 5100 HD - Page 82

4-32 | Model 5100 HD Analyzer
Data Type Description MB Starting
Regs
MB Reg Size
oat (NOT USED) 700 2
oat (NOT USED) 702 2
oat (NOT USED) 704 2
oat (NOT USED) 706 2
int16 (NOT USED) 708 1
int16 (NOT USED) 709 1
int16 (NOT USED) 710 1
int16 (NOT USED) 711 1
oat (NOT USED) 712 2
oat (NOT USED) 714 2
oat (NOT USED) 716 2
int16 Boolean, 1=ATEX, 0=normal 718 1
oat Process seal presure 719 2
int16 Boolean, 1=present, 0=not present 721 1
oat PRESX1 Analog Input Filtered value 722 2
oat Pressure Transducer 1 Scale 724 2
oat Pressure Transducer 1 O󰀨set 726 2
oat PRESX1 IIR lter weight 728 2
oat Cell pressure display 2 730 2
int16 Boolan: 0 = one cell, 1 = dual cell 732 1
int16 Sample spectrum center index 733 1
int16 Sample spectrum center index 2 734 1
oat Ramp scale of pattern 735 2
oat Current o󰀨set of pattern 737 2
oat Modulation depth of pattern 739 2
oat Modulation range of pattern 741 2
int16 Pattern type, 1=le, 2=generated 743 1
oat Ramp scale of pattern - laser# 2 744 2
oat Current o󰀨set of pattern - laser# 2 746 2
oat Modulation depth of pattern - laser# 2 748 2
oat Modulation range of pattern 750 2
int16 Pattern type, 0=le, 1=sine, 2=sq wave 752 1
oat Reference compensation 753 2
oat Cell pressure hi limit 755 2
oat Cell pressure lo limit 757 2
oat Analyte 3 (merged) concentration 759 2
oat Cross-over point for Alyte 3 concentration 761 2
int16 Switching analyte 763 2
int16 Time until next cal cycle 765 1
char[20] The auto calibration schedule. -1 is disabled.
The time should be a number like 14:30:45 for
2:30:45 PM.
766 10
char[20] Next schedule for calibration 776 10