Ametek 931S

Specications | 2-21
CSA-certified Model 931S and Model 932S Analyzers are marked with the
label shown below.
301-3685 Rev. A
CLASS I, DIVISION 1 GROUPS B, C & D
Western Research Analyzer Model:
___104-132Vac, 3A ___208-264 Vac, 2A, 50/60 Hz, <500W
PROCESS INSTRUMENTS
SN:
Tamb. +50°C
CLASS I ZONE 1 Ex d IIB+H2 T3, AEx d IIB+H2 T3

Open circuit before removing cover.
Caution
Ouvrir le circuit avant d'enlever le couvercle.
A seal must be installed within 250mm [10"] of the enclosure
Un scellement doit être installé à moins de 250mm [10"] du boîtier
C US