Ametek MiniFlash FP Vision - Page 23

69 pages

To Next Page

To Previous Page

MINIFLASH

FP(H) VISION

OPERATION MANUAL

For more information of using the instrument with the car battery see chapter „DC/AC power

converter”

Main Page

Table of Contents4
General Safety Summary7
Symbols8
General Information10
Measuring Standards12
Standard Method ASTM D645012
Standard Method ASTM D709412
MINIFLASH Versions13
FP VISION - Standard Temperature Version Type 44013
FPH VISION - High Temperature Version Type 44113
Measuring Method14
Patent14
Features Miniflash Fp(H) Vision15
Technical Data15
Unpacking16
MINIFLASH FP(H) VISION Front Panel19
MINIFLASH FP(H) VISION Rear Panel20
Installation21
Sample Cup Installation21
Installation of Water Cooling (FP Vision Only)21
External Keyboard Installation21
Preinstalled Printer Drivers21
DC/AC Power Converter Prowatt 300 Installation22
Mobile Installation22
User Management24
Simplicity and Flexibility24
End User License Agreement25
Login26
Logout27
Quick Start Measurement28
Create a Custom Measurement40
Fuel Dilution Curve43
Fixed Installed Dilution Curve (Navy JP6 and F75)43
Custom Fuel Dilution Curve44
Methods45
Measuring According to ASTM D709445
Screening Method for ASTM D709445
Measuring According to ASTM D645045
Screening Method for ASTM 645045
ASTM D93A / ISO 2719A Correlation Method (Pensky Martens Closed Cup)46
ISO 3679/3680 Correlation Method (ASTM D3828, IP 523/524)46
ASTM D93B / ISO 2719B Correlation Method (Pensky Martens Closed Cup)47
ASTM D93C Correlation Method (Pensky Martens Closed Cup)47
ASTM D56 Correlation Method (TAG Closed Cup)47
ISO 13736 / IP 170 Correlation Method (ABEL Closed Cup)47
Performing FLASH/NO-FLASH Tests47
Non-Refilling Option48
Start Temperature Adjustment (Ti-T)49
Pressure Threshold Adjustment P Limit (Custom Programs Only)49
Measuring50
Magnetic Stirrer50
Start Measurement50
Checking the Sample Temperature50
Check of Sample and Initial Temperature50
Flash Point Test50
Air Introduction into the Measuring Chamber51
Flash Point Detection51
End of Test51
Stand by52
Results53
Result List53
Details for Combustion Analysis54
Status55
Statuspage55
Settings56
Settings Menu56
Maintenance57
NETWORK Connection57
Requirements57
CONNECT to Grabner-Instruments57
Shut down58
Cockpit Software59
Grant of Cockpit™ Software License59
Software Update59
Preventive Maintenance60
Clean Heater60
Clean Arc Pins60
Clean Temperature Probe61
Cleaning of the Sample Cup61
Error Messages and Troubleshooting62
Sample Cup Lift62
Sample too Hot63
Missing Sample64
Instrument Does Not Show Values According to the Literature64
Arc Problems64
Pressure Detection Problems65
Temperature Problems65
Other Errors66
CE Declaration67
Customer Support and Information68

Ametek MiniFlash FP Vision - Page 23

Table of Contents

Related product manuals