Ametek MiniFlash FP Vision User Manual

16
© AMETEK, Inc.
5.3.5 DC/AC power converter PROwatt 300 Installation
1. Connect the analyzer with the supply cable to the power converter on one of the AC outlets.
2. Connect the power converter via plug to the cigarette lighter slot.
3. Turn on the power converter by switching the On/Off switch.
4. Turn on the instrument.
5. The analyzer is ready for operation.
5.3.6 Mobile installation
The flashpoint tester can be used in the field particularly in mobile laboratories mounted on vibration
lowered mounting plates. When used in mobile laboratories mains is available. If operated in the field with a
car battery a power converter available for the analyzer can be used to power up the instrument.
1
2
3
4
5

Ametek MiniFlash FP Vision Specifications

General

Brand	Ametek
Model	MiniFlash FP Vision
Category	Test Equipment
Language	English