56
© AMETEK, Inc.
16 ERROR MESSAGES AND TROUBLESHOOTING
To have some information about the proper functioning of the instrument there are several error messages and
indications displaying a malfunctioning of two devices: the automatic lift and the temperature sensors.
16.1 Sample Cup Lift
If the sample cup does not reach its proposed positions, the instrument displays no sample cup loaded.
The lift is going down again. If this happens please check the position of the sample cup.
If the sample cup is placed correctly and the lift still goes down several times, then the initial lift position needs to be
recalibrated. Contact the local representative or Grabner Instruments directly.
To Next Page
Loading...
Need help?
General
