16060-101 Rev. M
18
Definitions & Interpretation of Measurement Values
• IOPg - Goldmann-correlated IOP. IOPg agrees, on average, with the results obtained from an
• IOPcc - Corneal Compensated IOP. IOPcc takes the biomechanical properties of the cornea into
such as corneal visco-elasticity and thickness.
•
is below 3, the measurement will be in orange. It is recommended that you take an additional
measurement.
Note: When IOPcc is higher than IOPg, this indicates that the IOP for this patient may be being
understated using traditional methods of tonometry.
Note: When IOPcc is lower than IOPg, this indicates that the IOP for this patient may be being
overstated when using traditional methods of tonometry.
Alignment and Measurement
When power is applied to the Reichert 7CR, it initially performs a system check. After completion of
the system check, the title screen will be displayed.
To Next Page
Loading...
Need help?
General
