16060-101 Rev. M
13
Default Settings
This instrument is sent from the factory with measurement, printer, communication, and
miscellaneous parameters set to default settings. These settings can be changed to suit the needs
of the individual operator or clinician. A summary of these settings is given below with the default
selections shown in bold type. To customize these settings, follow the steps provided on page 12,
Instrument Setup, Default Settings.
Customized Options
This instrument has the following default settings:
Pressure: mmHg, kPa
Measurements: 3, 4
Averaging: Intelligent, Straight
Language: Eng, Fra, Deu, Esp, Por, Ita
Tone: On, Off
Sleep: 5, 10, 15, 20, Off
*****
*
*****
Eye Title: Right/Left, OD/OS
Printer: On, Off
Date Format: MDY,
Time Format: AM/PM, 24 HR
Date: 01/28/2018
Time: 05:00PM
Practice: Reichert
2400, 4800, 9600, 19200
7, 8
Parity: None, Odd, Even
1, 2
Note: Default settings are shown in Bold type.
To Next Page
Loading...
Need help?
General
