16060-101 Rev. M
7
Congratulations on your purchase of the Reichert
®
7CR Auto Tonometer + Corneal Response
Technology
®
.
The Reichert 7CR is an auto-aligning, non-contact tonometer used to measure the intraocular
applanation process employed in the Reichert 7CR enables the device to quantify the biomechanical
properties of the cornea and minimize the impact of these on the IOP measurement. This new IOP
by corneal properties than other methods of tonometry. Refer to the Instructions for Use section for
further details on IOPcc.
This User’s Guide is designed as a training and reference manual for operation, maintenance, and
troubleshooting. We recommend that you read it carefully prior to use and follow the instructions
in the guide to ensure optimum performance of your new instrument. Properly trained eyecare
professionals such as ophthalmologists, optometrists, opticians and eye care technicians should
operate this instrument.
Please retain this guide for future reference and to share with other users. Additional copies can
be obtained from your authorized Reichert Technologies
®
dealer or contact our Customer Service
department directly at:
Tel: 716-686-4500
Fax: 716-686-4555
E-mail: reichert.information@ametek.com
Indications for use
The Reichert 7CR is intended to measure the intraocular pressure of the eye, taking into consideration
the biomechanical response of the cornea.
Contraindications
Use of the Reichert 7CR is contraindicated in instances of:
• Ulcerated cornea
• Following keratoplasty
• Following penetrating trauma
To Next Page
Loading...
Need help?
General
