AMETEK CTS VDS 200Q Series
Manual for Operation V 1.3.1 20 / 36
Service
All service functions are indicated on the display.
The addresses of the AMETEK CTS GmbH and the
AMETEK CTS GmbH in Germany are shown.
The addresses of all AMETEK CTS sales agencies
are listed on the web site of EM TEST under:
www.emtest.com
Selftest
The operator can initialize a self test procedure to check the operation of the instrument. The software will clearly
explain the selftest procedure.
Set-up
The operator can change the simulator setting as explained on the next chapter.
Source Settings
The source settings menu contains features that are specific to the VDS 200Q series as explained in the next
chapter.