Ametek VDS 200Q Series - Delivery Groups; Basic Equipment Inclusions; Accessories and Options

AMETEK CTS VDS 200Q Series
Manual for Operation V 1.3.1 33 / 36
7.
Delivery Groups
7.1.
Basic equipment VDS 200Qxx.2
- VDS 200Q200.2 in double Rack (2 x 34HU)
- Three-phase mains connector (63 A)
- Emergency switch
- Connectors 200A (red/black, coded, 2 each)
- Ethernet cable
- 1 x Framebus cables
- 1 x Framebus terminator, No 101732
- BNC Jumper Cable (0.15m) for CH1 to VDS 200Q150.1
Options:
- Drawer for AutoWave
- Interconnection cables for PFM 200N200 (part of PFM 200N200 delivery) and/or AutoWave (if built into the
rack or delivered with the VDS 200Q system)
7.2.
Accessories and options
- User software „iso.control“
- Test, analysis and documentation with windows (see separate documentation)
- License version for testing according the most automotive standards
- Report generator with export function to wordprocessor program.
- AutoWave
- Arbitrary generator 16bit resolution 0...10V for external VDS control.
- The AutoWave replaces the 8bit resolution of the internal VDS 200N controller.
- AutoWave.control software for individual control of the AutoWave