69ARR1575
OPERATION MANUAL
Damage check
Open the front and rear bonnet.
Disconnect the cable from the (-) terminal of the machine‘s ba-
ttery.
Check the machine for any visible damage of individual parts of
the machine.
Focus especially on uid leaks.
Empty all damaged containers.
Prevention of oil shock
Before you start removing and disassembling any parts,
thoroughly clean the area around the valve cover, engi-
ne cylinder heads and wiring holder.
If you do not nd any visible damage or you have already re-
paired it, proceed as follows:
Remove the F21 fuse in the engine compartment (40 A).
Remove the air lter cartridges, replace if they are soiled with oil.
To Next Page
Loading...
