Ammann ARR 1575 Yanmar - Page 79

73ARR1575
555149
555135
555142
555143
OPERATION MANUAL
Reattach the wiring holder using two screws.
Reconnect the cable to the (-) terminal of the machine‘s battery.
Risk of burns from splashing oil!
Eye injuries, burns: Wear safety goggles.
Rotating the engine using the starter
Rotate the engine using the starter, about 1–2 minutes.
After several revolutions, any oil accumulated in the combusti-
on chambers should begin to ow out of the glow plug holes.
Repeat the procedure after about 5 minutes. There must not be
any oil left in the combustion chambers.
Reattach the glow plugs (18Nm torque).
Reconnect the connecting cables and cables to the glow plugs
(1.5Nm torque).
Mount the engine valve cover.
Mount the wiring holder.
Rotate the engine twice using the centre screw on the
crankshaft, use a ratchet spanner (1). If the engine cannot be
rotated, recheck the assembly procedure, otherwise contact an
authorized dealer.