H-1.601.00149-2.0
Page
2
Scope of Applicaion").
• [Maintenance Qualification] Only the manufacturer Ambulanc (Shenzhen)
Tech. Co., Ltd. or its authorized professionals can perform maintenance
measures.
• [Do not open] Do not open the E6 shield. Do not replace or modify the
external or internal parts of the E6.
Note:
• [Other devices] When E6 is used simultaneously with devices that emit
high-frequency radiation, (for example, mobile phones, radios) must be
kept at a distance of more than 1 m, otherwise it may cause dysfunction.
• [External Power Supply] When using an external power supply to power
the cardiopulmonary resuscitation machine, always connect it to a
simple-swap interface so that it can be quickly removed in the event of a
malfunction.
• [External Power Supply] When using an external power supply to power
the cardiopulmonary resuscitation machine, make sure that the power
cord is not caught or obstructed. Do not use an external power source
when it is not necessary, but use the battery inside the cardiopulmonary
resuscitation machine.
• [Liquid] Do not immerse the E6 in a liquid. If liquid enters the hood, it will
cause damage to the equipment.
1.3 Software
• A large number of quality assurance measures have been taken in the
development of the device software, and the risk due to software defects
is minimal.
1.4 Accessories / spare parts
Note:
• [Preventing exposure] Take measures to prevent silica gel and rubber
parts from being exposed to ultraviolet light and long-term direct
sunlight, otherwise these parts will be embrittled.
• [Use only approved accessories] Using accessories from other
manufacturers can cause malfunctions and incompatibilities. Please keep
in mind that in these cases the rights and responsibilities of the warranty
To Next Page
Loading...
