H-1.601.00149-2.0
Page
37
• Connect the vehicle charging cord to the E6
• Connect the vehicle charging cord to the car outlet (10-28 V DC)
5.8 Charging battery
There are two ways to charge your E6 battery:
Method 1: In the external E6 battery charger (optional). (As shown below)
• Place the battery in the slot of the battery charger,
• Connect the battery charger power cord to a wall outlet.
When all five battery indicator lights on the charger turn green, the battery is
fully charged.
Fig. 41 Charger
Method 2: Installed in E6. (As shown below)
• Place the battery in the slot of the E6 leg
• Connect the power supply to the DC input on the E6 side.
• Connect the power supply to a wall outlet.
When the battery icon on the screen shows 5 cells, the battery is fully
charged.
To Next Page
Loading...
