Amoul E6 - Installation; Packing List

H-1.601.00149-2.0
Page
20
4 Installation
4.1 Packing list
E6 Cardiopulmonary Resuscitator is packed in a single carton, including:
S/N
Description
Qty（PCS）
1
E6 machine （upper part and back board）
1
2
Suction cup
2
3
Carrying case
1
4
《user's manual》
1
5
Rechargeable battery
2
6
Patient stabilizing belt
1
7
Patient fixing belt
2
8
Power adapter
1
Accessory（optional）：
S/N
Description
Qty（PCS）
1
Suction cup
/
2
External battery charger
/
3
Rechargeable battery
/
4
Power adapter
/
5
Mainstream ETCO
2
module
/
Prepare the carrying case (as shown below):
1. Insert a fully charged E6 battery into the battery slot on the E6 leg.
2. Make sure the suction cup is installed correctly.
3. Place the upper part in the carrying case. Note that the main unit is facing
as shown below.
4. Place the adapter in the appropriate position on the attachment stand
between the E6 legs.
5. Place the battery charger and spare battery (optional) E6 battery in the
appropriate position of the accessory holder.
6. Place the patient stabilizing belt in the covered bag.