To Next PageTo Next PageWhat to do if Amoul Medical Equipment E6 can't start?
If your Amoul Medical Equipment E6 fails to start, there are a couple of potential reasons. First, the E6 unit itself might be faulty, in which case you should give it to the manufacturer or an authorized distributor. Alternatively, the battery might be depleted, so try charging the battery.
What to do if Amoul E6 Medical Equipment shows unstable power indicator?
If the power indicator on your Amoul Medical Equipment is unstable, the issue might be with the power cable connection. Ensure the power cable is securely connected.
What to do if Amoul Medical Equipment E6 can’t close?
If your Amoul Medical Equipment E6 won’t close, it might be due to incorrect operation. Try long-pressing the “On/Off” button for at least 3 seconds.
Why Amoul Medical Equipment has insufficient compression depth?
Insufficient compression depth with the Amoul Medical Equipment may occur if the patient is too small. In this case, stop using the E6 and switch to manual compression.
What to do if Amoul E6 Medical Equipment has communication error?
If you are experiencing a communication error with your Amoul Medical Equipment, it could be due to a problem with the main board communication. Check the connection between the MB and CB for any looseness.
Details safety marks, warnings, and tips for safe operation of the E6 device, including potential risks and guidance.
Provides a general overview of the E6 device, including functional inspection and sanitation procedures.
Discusses the quality assurance measures in software development and minimal risk of defects.
Covers important notes on accessories, spare parts, and warranty implications for using non-approved items.
Explains various icons and symbols used in the manual for clear communication of device functions and warnings.
Provides essential warnings and notes regarding battery status, replacement, and charging procedures.
Details critical warnings and notes for operating the E6 device safely and effectively, covering patient positioning and potential hazards.
Defines the intended use of the E6 cardiopulmonary resuscitation machine for patients with acute cardiac arrest.
Lists conditions and patient sizes where the E6 cardiopulmonary resuscitator should not be used.
Discusses potential side effects associated with cardiopulmonary resuscitation, including those specific to the E6 machine.
Specifies the necessary qualifications and training required for personnel operating the E6 device.
Details the main structural components of the E6 cardiopulmonary resuscitation machine.
Provides a visual and textual description of the various components included with the E6 machine.
Offers detailed descriptions of the E6 host unit from different views (front, side, top, bottom).
Explains the layout and functions displayed on the E6's main operating interface screen.
Details how to navigate and use the function menu for system settings, logs, and other operations.
Lists all items included in the standard and optional packaging for the E6 Cardiopulmonary Resuscitator.
Provides instructions for installing and charging the E6's lithium polymer batteries.
Guides the user on how to attach the fixing belt to the E6 legs for secure operation.
Explains the process of attaching the stabilizing belt straps to the E6 legs.
Details the connection procedure for an optional EtCO2 module to the breathing circuit.
Instructions for initiating CPR rescue upon confirming a patient's cardiac arrest.
Step-by-step guide on how to unpack the E6 Cardiopulmonary Resuscitator from its carrying case.
Covers the initial placement and setup of the E6 back plate and upper part on the patient.
Details how to position the suction cup and set pressing depth and mode for effective CPR.
Explains how to use the stabilizing belt to ensure correct positioning and minimize interruptions during operation.
Provides instructions on how to safely move a patient while the E6 device is in use.
Guides on how to replace the E6 battery safely while the device is operational.
Describes the two methods for charging the E6 battery, either in an external charger or while installed in the device.
Information on the device's dual battery system, working time, and charging.
Discusses the use of E6 with other medical devices/drugs and specific procedures like defibrillation and ventilation.
Step-by-step instructions for safely removing the E6 device from a patient.
Outlines the methods for cleaning the E6 system surfaces and belts using approved disinfectants.
Provides instructions for removing and installing the suction cup, including disposal.
Lists common technical faults of the E6 device, their causes, and recommended remedies.
Details physiological alarms, their causes, LED indications, and recommended actions for the E6 machine.
Covers system alarms, including LED indications, sound alerts, causes, and troubleshooting methods.
Explains system prompts, their purpose, and the corresponding trigger actions for the E6.
Lists weekly and post-use checks to ensure the E6 cardiopulmonary resuscitator is clean and functional.
Provides instructions for removing and attaching the patient fixing belt to the E6 leg.
Guides on how to disassemble and reassemble the patient stabilizing belt.
Instructions for removing, charging, and replacing the E6 battery, with notes on spare batteries.
Details the standard items included in the E6 machine package, with quantities and maternal numbers.
Lists optional accessories available for the E6 device, including their maternal numbers and quantities.
Specifies the management category for the E6 Cardiopulmonary Resuscitator.
Details the physical dimensions, weight, and screen specifications of the E6 machine.
Covers the operating and storage temperature, humidity, and air pressure requirements for the E6 device.
Details the input voltage, frequency, and current for the E6 power adapter.
Defines the suitable patient criteria, including sternal height and chest width for E6 use.
Outlines the pressing depth, frequency, and mode settings for the E6 cardiopulmonary resuscitator.
Provides specifications for the E6 battery, including size, weight, capacity, voltage, and charging time.
Details the operating, charging, and storage temperature specifications for the E6 batteries.
Provides electromagnetic compatibility statements and requirements for operating the E6 device in various environments.
General| Brand | Amoul |
|---|---|
| Model | E6 |
| Category | Medical Equipment |
| Language | English |
