H-1.601.00149-2.0
Page
46
2. Fold the patient fixing belt to make the symbol visible.
3. Press the belt assembly firmly together.
8.3 Uninstall and install patient stabilizing belt
Open the buckle and disassemble the leg strap that is part of the stabilizing
belt.
Clean the stabilizing belt as described in Section 6.1
Install as described in Section 4.4
8.4 Remove battery and charge
1. Replace the battery with a fully charged battery.
2. Charge the used battery for future use.
You can charge the E6 battery in two ways. For details, see 5.8
Note：
• [Keep battery installed] In order for E6 to operate, the battery must
always be installed (even when powered by an external power source). To
minimize interruptions, we recommend always having a spare E6 battery
that has been charged in the carrying case.
Warning：
• [Use only approved accessories] Using accessories from other
manufacturers can cause malfunctions and incompatibilities. Please keep
in mind that in these cases the rights and responsibilities of the warranty
will be void: do not use the accessories recommended in the instructions
or do not use the original spare parts.
To Next Page
Loading...
