H-1.601.00149-2.0
Page
5
• [Gel is present on the chest] If there is a gel on the patient's chest (for
example, when used for an ultrasound examination), the position of the
pressing disc changes during use. Remove all gels before placing the
suction cup.
• [Application Stabilizer] If the E6 Stabilizer Band is used to prevent or delay
any treatment for the patient, the device should be deferred.
• [Auxiliary Therapy] Using other medical devices or drugs with E6 will
affect the treatment. For other devices and/or drugs, be sure to refer to
their Instructions for Use to ensure they are suitable for use with CPR.
• [Keep your hands away] Do not place your hands on or under the press
pad while the E6 is running. Keep your hands away from the lock when
attaching the upper part or lifting the patient.
• [Vein Path] ensures unobstructed venous access.
• [Do not block the vent hole] Do not block the vent hole under the hood,
as this may cause the device to overheat.
• [Device Alarm] If any malfunction occurs during operation, the alarm light
will illuminate and an alarm will sound. See section 7.3 for
troubleshooting.
• [Do not use the strap to lift the patient] Do not use the strap to lift the
patient. The strap is only used to secure the patient to the E6.
• [Skin burns] The temperature of the cover and battery may rise above
118°F / 48°C. If it is too hot, do not touch it for a long time to prevent skin
burns. The patient strap is removed from the patient's hands.
To Next Page
Loading...
