H-1.601.00149-2.0
Page
34
5.6.2 Preparing to lift the patient
1. Decide which device you will be moving and where to place it.
2. Personnel on the side of the patient:
a) place one hand under the back plate at the bottom of the leg;
b) Hold the patient's belt, pants or thighs with the other hand.
3. Make sure the patient's head is stable.
5.6.3 Lifting the patient
1. Press "Pause" to pause pressing.
Fig. 37 Pause
2. Lift the patient and move it to a stretcher or other transport device
(backplane, vacuum mattress or similar).
3. Make sure the suction cup is in the correct position on the patient's
chest.
4. Press "Start" to restart the press
To Next Page
Loading...
