AMSTRAD cpc 6128 - Mover

MOVE
M 0 V E <x co-ordinate> , <y co-ordinate>[, [<ink>][, <ink mode>]]
10 MODE 1 :TAG
20 x=RND*800-100:y=RND*430
30 MOVE x,y
40 PRINT "I moved here";
50 GOTO 20
run
COMMAND: Moves the graphics cursor to the absolute point specified by <x
co-ordinate> and <y co-ordinate>. The optional <ink> parameter may be used to change
the graphics pen ink, in the range 0 to 15.
The optional
<ink mode> determines how the ink to be written next, will interact with
that already on the graphics screen. The 4 <ink mode>s are:
O:Normal
1: XOR (eXclusive OR)
2:AND
3:0R
Associated keywords: MOV E R, 0 RIG I N, X PO S, Y PO S
MOVER
M 0 V E R <x offset> , <y offset> [ , [<ink>][, <ink.mode>]]
10 MODE 1:TAG:MOVE 0,16
20 PRINT "Life has its";
30 FOR n=1 TO 10
40 MOVER -32,16
50 PRINT "ups";:NEXT:PRINT " and";
60 FOR n=1 TO 10
70 MOVER -64,-16
80 PRINT "downs";:NEXT
run
COMMAND: Moves the graphics cursor to a point relative to its current position. The
relative position is specified by <x offset> and <y offset>. The optional <ink> parameter
may be used to change the graphics pen ink, in the range 0 to 15.
The optional
<ink mode> determines how the ink to be written next, will interact with
that already on the graphics screen. The 4 <ink mode>s are:
O:Normal
1 : XOR (eXclusive OR)
2:AND
3:0R
Associated keywords: M 0 V E, 0 RIG I N, X PO S, Y PO S
Complete List of Keywords
Chapter 3 Page 47