At
the
A>
prompt, type:
disckit3
Select
the
Ve r ; f y option from
the
main
DISC KIT menu (key f1), and
then
follow
the
instructions on
the
screen.
If
you
are
operating a 2-drive system, you will be given the option to verify a disc
either
in
Drive A or Drive
B.
When
the
disc
that
you wish to verify is inserted in
the
drive, type Y to commence
verifying.
When verifying is completed,
the
following message will be displayed:
Verify
compLeted
Remove
disc
Press
any key
to
continue
If
you
are
operating a 2-drive system; you will be requested to remove BOTH discs,
and you
must
do
so
before you can perform any further operations. You may
then
repeat
the
verifying process by typing
Y,
or exit to the main DISC KIT menu by
pressing any other key.
Using the
DISC
KIT
program
on
CP/M
2.2
If
you wish to format, copy, or verify discs created on or for the CPC664 or
CPC464+
DDIl
(which both use
CP/M
2.2), a DISC KIT program
has
been provided
on
Side 4 of your system discs package for
this
purpose. The program is called
D I S C KIT 2,
and
operates
in
the
same
manner
as D I S C KIT 3
,just
described.
To
run
D I S C KIT 2,
insert
Side 4 of your system discs package into the computer's
disc drive,
and
type:
Icpm
After you receive
the
CP/M
2.2 'sign-on' message and the
A>
prompt, type:
disckit2
From
then
on, simply select
the
required
menu
options and follow the instructions
displayed,
as
previously described for D I S C
KIT
3.
NOTE
-
During
copying,
the
D I S C KIT 2 program utilises
the
screen memory for
data. You will therefore see random
patterns
appear on
the
screen while copying is
being performed. .
Chapter 1
Page
82
Foundation Course
To Next Page
Loading...
