Amtech Axpert-Eazy Series - Page 127

Axpert-Eazy AC Variable Frequency Drive
6-81
6
C203 ~ C204: Iout-1 ~ 2
User can configure two programmable analog outputs (4~20mA) for different functions using these
parameters. The options are same as above.
The default setting of the programmable sequence outputs are as under.
TERMINAL
OPTION
NAME
IO1 3 Output Power
IO2 4 Output Volt
C205: Vout-1 Gain
This is gain setting for the VO1 analog output.
C206: Vout-2 Gain
This is gain setting for the VO2 analog output.
C207: Iout-1 Gain
This is gain setting for the IO1 analog output.
C208: Iout-1 Bias
This is bias setting for the IO1 analog output.
C209: Iout-2 Gain
This is gain setting for the IO2 analog output.
C210: Iout-2 Bias
This is bias setting for the IO2 analog output.
C211: FSV Gain
This is gain setting for the FSV analog input.
C212: FSV Bias
This is bias setting for the FSV analog input.
C213: FSI Gain
This is gain setting for the FSI analog input.
C214: FSI Bias
This is bias setting for the FSI analog input.
C215: VIN Gain
This is gain setting for the VIN analog input.
C216: VIN Bias
This is bias setting for the VIN analog input.