AMX MST-701

Programming
81
Modero S Series Touch Panels - Configuration & Programming Manual
Audio Commands (Cont.)
?MUT Queries the panel mute status (returned in custom event).
Syntax:
"'?MUT-[device]'"
Variables:
0 = Active device (default if none specified)
1 = Built-in Speaker
2 = USB Headset
3 = Bluetooth Headset
CUSTOM.TYPE = EVENTID = 1305
CUSTOM.ID = ADDRESS = 0
CUSTOM.FLAG = 0
CUSTOM.VALUE1 = 0 (unmuted)/1 (muted)
CUSTOM.VALUE2 = 0
CUSTOM.VALUE3 = 0
CUSTOM.TEXT = blank
^MUT Sets the panel mute 0 or 1.
Syntax:
"'^MUT-<status>,[device]'"
Variables:
Status:
0 = unmuted,
1 = muted
Device:
0 = Active device (mutes device if none specified)
1 = Built-in Speaker
2 = USB Headset
3 = Bluetooth Headset
?VOL Queries the panel volume (returned in custom event).
Syntax:
"'?VOL-[device]'"
Variables:
0 = Active device (default if none specified)
1 = Built-in Speaker
2 = USB Headset
3 = Bluetooth Headset
Custom Event Type 1306
Address 0
Value1 - master volume value
^VOL Sets the panel volume 0 to 100. 100 is max volume. Device is as follows:
Syntax:
"'^VOL-<level>,[device]'"
Variables:
0 = Active device (default if none specified)
1 = Built-in Speaker
2 = USB Headset
3 = Bluetooth Headset