Upgrading Firmware
102
MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom
3. In the Firmware Installation popup window, press the Factory button.
4. The Confirmation Dialog box (FIG. 118) will ask “Are you sure you want to install the following firmware?” The
option to choose Yes will be enabled after five seconds. Press Yes to load the firmware listed, and No to return to the
Firmware Installation popup window.
5. If you choose Ye s, the device will retrieve the files and then reboot (FIG. 119).
FIG. 118 Factory Firmware reset confirmation dialog box
FIG. 119 Factory Firmware Reset system message
To Next Page
Loading...
