Andor Technology iXon3 Series - Components; Camera

Page 8
iXon 3
Introduction
1.2 - COMPONENTS
The Andor iXon3 system comprises the following main items:
• Detectorhead(hereinafterreferredtoasa Camera - see gure 1 below)
• 2offBNC-SMBcables
• UsermanualsonCD
• Softwaredisk(SDKand/orSolisifordered)
• AndorProgrammerguidetoAndorBasic(ifordered)
• SoftwareDevelopmentKitmanual(ifSDKordered)
• Cameraspecicperformancebookletorsheet
• ESDwriststrap.NOTE: This must be worn at all times when handling the PCI card
• PCI/PCIecard(CCI-22,CCI-23orCCI-24,cameramodeldependent)
• PCI/PCIecontrollercardtocameracable
• Powersupplyblockandcorrectpowercableforthecountrywherethecameraistobeused
The following items are also available as optional accessories:
• MountingPosts(see page 21)
1.2.1 - Camera
Figure 1: iXon3 camera
Introduction