FBEEP Fail Beep On/Off SYS TEM
Syn tax: FBEEP <c>,<state>
c: 1 or 2
state: ON or OFF
Re marks: When ON, causes an audio beep every time the lim its for the se lected
chan nel fail. If FBEEP is ON, and FHOLD is ON, when ever the lim its
speci fied for the chan nel have been ex ceeded, a beep sounds once every
sec ond un til FHOLD is turned OFF, or the CLEAR key (CLR) is pressed.
The FAIL in di ca tion is not af fected by the CLEAR key, and can only be
cleared by turn ing FHOLD off. If a limit fail hap pens again, the alarm
sounds again.
Re lated
Com mands: FHOLD
Query: FBEEP? <c>
Re turned
String: FBEEP <c>,<state>
FHOLD Fail in di ca tor Hold
CHAN NEL
Syn tax: FHOLD <c>,<state>
c: 1 or 2
state: ON or OFF
Re marks: If the high or low lim its fail, and this set ting is turned on, the fail status
con tin ues un til the com mand is turned off. All BNC out puts, beeps and
dis plays con tinue to be in the 'fail' state un til af ter the OFF is re ceived.
Re lated
Com mands: FBEEP
Query: FHOLD? <c>
Re turned
String: FHOLD <c>,<state>
FROFF Fre quency/Off set Display
SYSTEM
Syn tax: FROFF <state>
state: ON or OFF
Re marks: This command turns on the top line information text displaying the
frequency and off set for the sen sors used, simi lar to the min- max data
ML2400A OM 6-39
GPIB OPERATION ML24XXA NATIVE COMMANDS
To Next Page
Loading...
