EasyManua.ls Logo

Anritsu ML2400A Series - ML4803 A Quick Ref er Ence

Anritsu ML2400A Series
275 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
B-3 ML4803A QUICK
REFERENCE
The fol low ing ta bles ref er ence ML4803A emulation mode com mands.
Ta ble B-14. ML4803A Em u la tion Mode Com mands
Com mand Func tion Page
AVE Sen sor av er ag ing setting 6-88
CAL Set the user cal fac tor value 6-65
CCA Clear the user cal fac tor to zero 6-89
CDJ Per form a Cal 0 dBm 6-89
COF Clear the off set value to zero 6-89
COS Turn ON the 50 MHz, 0 dBm RF cal i bra tor output 6-89
CRF Clear the ref er ence value to zero 6-89
CST Turn OFF the 50 MHz, 0 dBm RF cal i bra tor out put 6-89
DBM Sets the dis play chan nel units to dBm 6-89
DBR Set the dis play chan nel units to dB and takes the rel a tive value 6-89
EMUL GPIB emu la tion mode 6-89
MCA Set the cal fac tor value at the spec i fied mem ory lo ca tion in dBm 6-90
MCC Clears the cal fac tor value at the spec i fied mem ory location 6-90
MCO Clears the off set value at the spec i fied mem ory location 6-90
MCQ Clears the frequency value at the spec i fied mem ory lo ca tion 6-90
MCR Clears the reference value at the spec i fied mem ory lo ca tion 6-91
MCT Clears all values at the spec i fied mem ory lo ca tion 6-91
MDI Dis able mem ory store set ting and use 6-91
MEN En able set ting of the mem ory stores and ap ply the last mem ory store configured 6-91
MFG Set the fre quency value at the spec i fied mem ory lo ca tion in GHz 6-91
MFM Set the fre quency value at the spec i fied mem ory lo ca tion in MHz 6-91
MOF Set the offset value at the spec i fied mem ory lo ca tion in dBm 6-92
MRF Set the reference value at the spec i fied mem ory lo ca tion in dBm 6-92
ODT Out put the cur rent cal i bra tion fac tor, off set value, and ref er ence level 6-92
OFF Set sen sor off set value 6-93
OI? Re quest identity 6-93
OMR Out put a mem ory store set of data 6-93
OPW Re quest for chan nel reading 6-94
REF Set the ref er ence value 6-96
RNG Sen sor mea sure ment range hold 6-96
SRQ Turns on or off the SRQ on out put data ready 6-96
STA Re start av er ag ing reading 6-97
WAT Set the dis play chan nel unit to Watts 6-97
ZAJ Zero the sensor 6-97
ML2400A OM B-9
APPENDIX B ML4803A QUICK REFERENCE

Table of Contents

Related product manuals