Anritsu ML2400A Series User Manual

An op tional rear panel Cali bra tor con nec tor is of fered as an al ter na tive (see
Fig ure 3-2). If the rear panel con nec tor op tion is in stalled, the front panel con -
nec tor is not in stalled. Re fer to Chap ter 5, Pro ce dures, for in for ma tion on us -
ing the Cali bra tor out put.
Sen sor A
Con nec tor
This con nec tor is a 12- pin cir cu lar pre ci sion con nec tor to be used in con junc -
tion with power sen sor ca bles. An op tional rear panel Chan nel A con nec tor is
of fered as an al ter na tive (see Fig ure 3-2). If the rear panel con nec tor op tion is
in stalled, the front panel con nec tor is not in stalled.
Sen sor B
Con nec tor
(ML2408A only)
This con nec tor is a 12- pin cir cu lar pre ci sion con nec tor to be used in con junc -
tion with power sen sor ca bles. An op tional rear panel Chan nel B con nec tor is
of fered as an al ter na tive (see Fig ure 3-2). If the rear panel con nec tor op tion is
in stalled, the front panel con nec tor is not in stalled.
NOTE
Only MA2400A Se ries sen sors can be con nected di rectly
to the ML2400A Se ries Power Me ters. MA4700A and
MA4600A Se ries sen sors re quire the MA2499A or
MA2499B Anritsu Sen sor Adapter. MP-Series (10-pin)
sen sors re quire an MA4001A or MA4002B adapter and
an MA2499B.
3-3 REAR PANEL
CONNECTORS
The Rear Panel con nec tors are il lus trated and described in Fig ure 3-2.
.
3-2 ML2400A OM
REAR PANEL CONNECTORS CONNECTIONS

Anritsu ML2400A Series Specifications

General

Brand	Anritsu
Model	ML2400A Series
Category	Measuring Instruments
Language	English