Anritsu ML2400A Series - C-5 SYSTEM MENU

C-5 SYSTEM MENU The Sys tem menus con trol the op er at ing modes, dis play vis i bil ity, sound, rear
panel func tions, and bat tery state of the ML2400A Se ries Power Me ter. Note
that the soft keys will ap pear dif fer ently de pend ing upon the op er a tion mode
se lected with the Setup soft key. Read out mode can be ei ther STANDARD or
CDMA.
Sys tem
Setup
[OPMD ] MODE
Read out | Pro file | Power vs Time | Source sweep
} CDMA Read out mode re moves Pro file
} and Source sweep modes
[*SAV, SYSLD, SYSRD, ] SAVE in stru ment setup
[SYSLNM ]
En ter setup num ber
1 to 10
LIST/SCROLL
[*SAV, SYSLD, SYSRD, ] RE CALL in stru ment setup
[SYSLNM ]
En ter setup num ber } only if stores avail able for RE CALL
1 to 10
LIST/SCROLL } only if stores avail able for RE CALL
[LINK ] LINK read out/pro file trig ger
On | off
FAST sys tem re call mode
PRESET to de fault setup
[*RST ] RE SET
[FRST ] FAC TORY
CAN CEL
Read out } if sys tem setup mode = Read out
[RDMODE] Read out MODE
STAN DARD | CDMA
[PCRH] Peak/Crest HOLD } if Chan nel|Setup|Read out mode=CDMA
TIME } if peak/crest|HOLD=TIME
MAN UAL | TIME
C-10 ML2400A OM
SYSTEM MENU APPENDIX C