Anritsu ML2400A Series - System Specifications

A-2 ML2400A OM
SYSTEM SPECIFICATIONS APPENDIX A
In stru men t
Ac cu racy: < 0.5 %
Zero Set and
Drift:
< 0.5 % MA2420A; < 0.5 % MA2470A Se ries and
MA2440A Se ries. Per cent of full scale in most sen si -
tive range, meas ured over one hour with maxi mum
av er ag ing af ter one hour warm up at con stant tem -
pera ture.
Noise: < 0.5 % of full scale in most sen si tive range, meas -
ured over a one minute in ter val with maxi mum av er -
ag ing, two stan dard de via tions at con stant
tem pera ture af ter one hour warm up, typi cal.
MA2470A Se ries, 20 pW typi cal.
1.00 mW Power Ref er ence
Fre quency: 50 MHz nomi nal
Out put
Level:
1.00 mW, ± 1.2%/year, ± 0.9% RSS,
trace able to Na tional Standards
VSWR: < 1.04
Con nec tor: Type N fe male
SEN SOR / CHAN NEL CON TROL
Op er at ing
modes:
Readout: dual chan nel. RF power or volt age.
Power vs. Time: sin gle chan nel graphic of read out
data over ad just able time in ter val. RF power or volt -
age.
Pro file: sin gle chan nel RF peak power graphic dis -
play for analy sis of re peti tive pulse or tran sient
wave forms.
Source Sweep: Sin gle chan nel graphic dis play syn -
chro nized to an RF source.
Range Hold: Cur rent range or se lecta ble 1 through 5.
Av er ag ing Auto- averaging: Mov ing av er age in creases av er ag ing
at low power ranges.
Av er ag ing Types: Auto, Man ual (Mov ing, Re peat)
Man ual Av er age Range: 1, 2, 4, ..., 512
Low- Level Av er ag ing: Low, Me dium, and High set -
tings ap ply post- average low pass fil ter to im prove
visi bil ity at high dis play reso lu tion set tings.