Ap pen dix A
Speci fi ca tions
A-1 INTRODUCTION This ap pen dix pro vides sys tem speci fi ca tions for the ML2400A Se ries
Power Me ters along with list ings of sys tem de faults and er ror
messages.
A-2 SYSTEM
SPECIFICATIONS
This sec tion provides over all sys tem specifications.
ML2400A OM A-1
Fre quency
Range: 10 MHz to 110 GHz (sen sor de pend ent)
Power
Sen sors:
Me ter speci fi ca tions ap ply to MA2400A Se ries Power
Sen sors. Com pati ble with MA and MP Se ries sen -
sors.
Sen sor
Dy namic
Range:
MA2420A Se ries Fast Ther mal Sen sors: 50 dB
MA2440A Se ries High Ac cu racy Power Sen sors: 87
dB CW
MA2470A Se ries Power Sen sors: 90 dB CW
MA2469A Power Sen sor with 80 dB dymamic range.
Power
Meas ure ment
Range:
–70 to +47 dBm (0.1 nW to 50W), sen sor/attenua tor
de pend ent. Use cou plers for higher power lev els.
Volt age
Meas ure ment
Range: 0.00 to 20.00 V, nomi nal
Dis play
Range:
–99.999 to +99.999 dB
Dis play Reso -
lu tion:
Se lecta ble from 0.1 dB to 0.001 dB lim ited to 0.01 dB
in graphi cal dis play modes; Lin ear power units, 3 to
6 digit, 1 – 3 dig its se lecta ble to right of deci mal nW –
W; Volt age, 1 – 2 dig its se lecta ble to right of deci mal.
Off set Range: –99.99 to +99.99 dB. Fixed value or fre quency de -
pend ent ta ble.
Dis play
Units: dBm, dB, dBr, dBmV, dB
mV, W, %, Volts
To Next Page
Loading...
