Re marks: When SRQ0 is is sued, the SRQ will no long turn off and on with each
read ing. The SRQ is set back on by the SRQ1 com mand or by re quest ing
data.
STA Re start av er ag ing read ing.
WAT Sets the dis play chan nel units to Watts.
Re marks: Turns off rel a tive mode. Rel a tive is not avail able in this mode.
ZAJ Zero the sen sor.
Re marks: Dur ing the zero op er a tion, the zero bit in the sta tus byte is set. When
the zero op er a tion is com pleted, the zero bit in the sta tus byte is cleared.
When em u lat ing the ML4803, the ML2400 may take lon ger to zero a
sen sor than the ML4803 it self. When per form ing a zero, the sta tus byte
should be used to iden tify when ze ro ing is com plete.
ML2400A OM 6-97
GPIB OPERATION ML4803A EMULATION COMMANDS
To Next Page
Loading...
