Re marks: Same as the *CLS com mand. Re sets all of the GPIB status reg is ters and
clears the in put queue.
CT Clear the cal fac tor ta ble
Syn tax: CT<ta ble_number>
ta ble
number: 0 to 9
Re marks: Clears the specified cal fac tor ta ble to a sin gle 50mhz en try at 100%.
Since the ML2400A stores the cal fac tor ta ble in for ma tion in the sen sor,
this data must be saved to the sen sor by us ing the ‘EX’ com mand or an
ad di tional com mand ‘SV’, or the data could be lost. The sav ing of the
cal fac tor ta ble data to the sen sor can be done at the end of all up dates
to a par ticu lar ta ble.
DA Dis play All
Syn tax: DA
Re marks: Turns on all the seg ments of the dis play to ver ify proper op era tion. The
dis play is re turned to nor mal when an other com mand is sent.
DC Duty Cy cle state
Syn tax: DC<state>
state: 0 = OFF
1 = ON
Re marks: Turns on or off ap pli ca tion of the duty cy cle to the sen sor data.
DD Dis play dis able
Syn tax: DD
Re marks: Turns the dis play off to al low faster meas ure ments to be taken.
Re lated
Com mands: DE, DF
ML2400A OM 6-107
GPIB OPERATION HP 437B EMULATION COMMANDS
To Next Page
Loading...
