Ref er ence Os cil la tor = Off
Ac tive en try chan nel = A
Meas ure ment units = Watts
REL mode = off
Meas ure ment pa rame ters (set for Sen sor A and Sen sor B):
Cal Fac tor = 100.0%
Cal Adj = 100.0%
Off set = 0.00 dB
RA Auto Range
Syn tax: RA
Re marks: Sets the ML2400A Se ries to auto mati cally se lect the cor rect range for
the meas ure ment.
RC Re call setup
Syn tax: RC<val>EN
val: 1 to 10
Re marks: The ML2400A Se ries can store up to 10 in stru ment con figu ra tions for
con ven ient re call. The con figu ra tion pa rame ters stored are the same pa -
rame ters the ML2400A Se ries stores in its own *SAV and *RCL com -
mands. There fore, RC is equiva lent to *RCL, and ST is equiva lent to
*SAV.
Se lect ing Reg is ter 0 al ways re stores the pre vi ous power me ter con figu -
ra tion, pro vid ing an ex pe di ent way to re cover from an en try er ror.
RH Range hold
Syn tax: RH
Re marks: Hold the power me ter in the cur rent range. The dif fer ences in sen sor
ranges must be taken into ac count when the ML2400 is be ing used to
em u late the HP 438.
RL Rela tive mode
Syn tax: RL<mode>
ML2400A OM 6-127
GPIB OPERATION HP 438A EMULATION COMMANDS
To Next Page
Loading...
