CC: sen sor A range
cc: sen sor B range
DD: sen sor A fil ter
dd: sen sor B fil ter
E: meas ure ment units
F: ac tive en try chan nel
G: OSC status
H: REL mode status
I: trig ger mode
J: group trig ger mode
K: lim its check ing status
L: sen sor A lim its status
M: sen sor B lim its status
oth ers not used
ST Store setup
Syn tax: ST<val>EN
val: 1 to 10
Re marks: Stores the pres ent con figu ra tion to the se lected reg is ter.
Ex am ple: To store the cur rent in stru ment con figu ra tion in reg is ter 2:
ST2EN
Re lated
Com mands: RC
TR0 Trig ger hold mode
Syn tax: TR0
Re marks: Sets both chan nels to trig ger hold mode. It does not trig ger un til it re -
ceives a TR1 or TR2 or GET (group ex ecu tive trig ger), *TRG or TR3
com mand. If it re ceives a TR3 com mand it re verts back to the trig ger
mode it was in be fore the TR0 com mand was sent. If the REM line is
low, this com mand has no ef fect.
Re lated
Com mands:
TR1, TR2, TR3, *TRG, Group Exe cute Trig ger (GET), GT0, GT1, GT2
TR1 Trig ger im me di ate
Syn tax: TR1
ML2400A OM 6-129
GPIB OPERATION HP 438A EMULATION COMMANDS
To Next Page
Loading...
