Anritsu ML2400A Series - Page 270

1 to 10
[MODINIT ] INI Tial ize mo dem
AUTODIAL setup
[MODLIM ] LIMITS fail
True | false
[MODRNG ] RANGE fail
True | false
[MODPWR ] POWER on/off
True | false
BNC setup
PORT
Out put 1, out put 2, in put 1, in put 2
[OBMD ] Op er ating MODE only if port = out put 1 or out put 2
o/p 1
off | an a log out | pass/fail | sig chan A | lev el ing A1 | lev el ing A2 | AC Mod out put
o/p 2
off | an a log out | RF blank ing | pass/fail | sig chan B | lev el ing B1 | lev el ing B2
if mode = AN A LOG OUT and port = out put 1 or out put 2
[OBCH ] CHAN NEL
1 | 2
[OBVST ] Volt age START
-5V to +5V
[OBVSP ] Volt age STOP
-5V to +5V
[OBDST ] DIS Play START power
-70dB to +47dB
0 to 50W
37 to 154dBuV
-23 to 94dBmV
[OBDSP ] DIS Play STOP power
-70dB to +47dB
0 to 50W
37 to 154dBuV
-23 to 94dBmV
if mode = PASS/FAIL and port = out put 1 or out put 2
C-14 ML2400A OM
SYSTEM MENU APPENDIX C