Anritsu VectorStar MN469 C Series Maintenance Manual

3-6 Directivity and Test Port Match Verification Chapter 3 — Performance Verification
3-10 PN: 10410-00730 Rev. D MN469xC Series Multiport Test Set MM
37. Change all DUT Connector settings to K-Conn(F) for MN4694C or V-Conn(F) for MN4697C in the One
Port Cal Setup dialog box. Click the OK button when done. See Figure 3-3 below.
Figure 3-3. One Port Cal Setup Dialog Box

Anritsu VectorStar MN469 C Series Specifications

General

Brand	Anritsu
Model	VectorStar MN469 C Series
Category	Test Equipment
Language	English