21
Sprint Pro Performing tests
7. Press the soft key to start test. During the test
the overall peak and average gas readings for the
total time of the test will be displayed.
8. To stop test at any time, press the ESC key. Use
the soft keys
or to select 'Quit test?'.
9. Use the soft keys to log or print results as required.
10. For long duration tests the number of samples
may be large. It is possible to reduce the length
of the exported results by only exporting samples
when the peak exceeds selected levels within a
given sample period.
11. Using the soft keys
and
to Select Report CO above
or Report CO
2
above, then
press the soft key
.
12. Use the soft keys
and
to select the gas level
required and then press the
soft key
.
13. Press
to print report.
Ambient Air Monitor
Select duration:
Use to start test
Sample interval:
1 minute
15 minutes
15:37:55
31-Aug-18
Ambient Air Monitor
Note:
Unless aborted this
test will last 15 minutes
Confirm when ready
Ensure there is enough
battery life or the
charger is connected
15:37:55
31-Aug-18
Ambient Air Monitor
15:37:55
31-Aug-18
CO
Pk CO2
Avg CO
0
####
####
ppm
ppm
ppm
of test
CO2
Pk CO2
Avg CO2
10
##.##
##.##
%
%
%
Duration
00:00
Set Clean Air Level
Report CO2 above:
0.04 %
Use to print
Sample selected:
1
Report CO above:
0 ppm
15:37:55
31-Aug-18
Set Clean Air Level
Report CO above:
0 ppm
Sample selected:
1
15:37:55
31-Aug-18
To Next Page
Loading...
Need help?
General
