How to fix unusual sounds from Antunes VCT-2 Toaster?
If your Antunes Toaster is making unusual sounds, the fan may need cleaning or replacement, so clean the fan. The conveyor belt chains might be stretched or incorrectly adjusted; adjust the conveyor belt chains. Also, the motor drive chain may need lubrication, so lubricate the chain.
Why Antunes VCT-2 conveyor does not rotate?
If the conveyor on your Antunes Toaster isn't rotating, it could be due to several reasons. The conveyor belt or chain might have stretched, causing the chain to skip on the sprockets; measure and adjust the conveyor belt chains. Additionally, check for any internal parts or objects that might be interfering with the conveyor system and clear them.
What to do if crowns and/or heels must be forced into the Antunes VCT-2 Toaster and buns are sticking and burning?
If you're forcing buns into the Antunes Toaster, and they're sticking or burning, the belt wraps may be dirty, worn, or damaged, so clean or replace them. Also, the platen might have butter or debris buildup, requiring cleaning. Check the release sheet for dirt, wear, or damage, and clean or replace it. Make sure the buns are inserted correctly, with crowns in the front conveyor and heels in the rear, cut side facing the platen. The compression settings might also be incorrect, so adjust them as needed. Finally, check conveyor chains – they might be loose and need adjustment.
Why are my buns not toasting adequately in the Antunes Toaster?
If your buns aren't toasting well in the Antunes Toaster, the compression settings might be incorrect; adjust the compression knobs to achieve the desired toast quality. Also, inspect the release sheet for cleanliness, wear, wrinkles, or tears, and clean or replace it as needed. Check the platen for any butter or debris buildup and clean it. Finally, adjust the light/dark setting to your preference.
What to do if Antunes Toaster has no control display?
If the Antunes Toaster's control display is not working, start by ensuring the power cord is correctly plugged into the electrical outlet. Also, check the circuit breakers; reset them if they've tripped. If issues persist, inspect the power cord, plug, and outlet for any damage. Try turning the unit off and on again using the power switch. If these steps do not solve the problem, it could be due to damaged power switch.
What does ERR 10 mean on my Antunes VCT-2?
If the Antunes Toaster displays ERR 10, it means the internal temperature of the control compartment has exceeded 160° F. Make sure the fan intake on the back of the toaster is clean, unblocked, and has proper spacing. Clean the cooling fan if needed. If the error persists, contact your authorized service provider. Also, check if the cooling fan is working; if not, replace it.
What to do if my Antunes VCT-2 displays ERR 11, 12, 15 or 17?
If the Antunes Toaster displays ERR 11, 12, 15 or 17, it indicates an electrical failure. Try performing a factory reset by turning the power switch off, then press and hold the Up & Down arrow buttons together while turning the power switch back on. The display should show FR (factory reset). If the error code persists, contact Antunes technical service.
How to fix ERR 11, 12, 15, or 17 on Antunes Toaster?
If your Antunes Toaster displays ERR 11, 12, 15, or 17, it indicates an electrical failure. Perform a factory reset by ensuring the power switch is off, then press and hold the Up & Down arrow buttons together while turning the power switch on. The display will show FR (factory reset).
Contact Antunes Customer Service for missing/damaged parts or operational issues.
Comply with codes, use for intended purpose, ensure proper grounding.
Do not modify plug, use grounded connector, ensure proper grounding. Avoid extension cords.
Do not operate if damaged, block openings, immerse unit, or let cord hang. Use soft cloths for cleaning.
Provide 3 inches space, remove packing, clean removable parts, wipe unit surfaces.
Turn on power, check for clicking sound, unit warms up, displays 'Lo-P' then 'USE'.
Insert buns correctly. Use platen tool with scrub pad to dislodge stuck product.
Addresses no display, conveyor issues, and inadequate toasting quality.
Covers bun sticking, unusual sounds, and troubleshooting specific error codes.
To Next Page
General
