User Manual
17
When you enable ―Daylight Saving‖ function you need select week or date format first.
Then you need set the time point for ―Daylight Saving‖ start time and end time. And
press [C] key enter save interface.
Press [OK] to Confirm and save.
2.5.1.7 Net
Network setting main includes [IP Address], [Subnet Mask], [MAC Address] and
[Gateway IP] settings.
In [System], press [ IN] or [OUT] key to select [Net] option.
Press [OK] key to enter net parameter interface.
Mode:
There are two modes for networking.
Press [ IN] or [OUT] key to select [Server] or [Client].
Server: Normal net mode;
Client: Only communication with the PC which has server IP.
To Next Page
Loading...
Need help?
General
