22
2.12 Work rules
2.13 Environment
pecial tools are necessary for certain tasks. The tools are not contained in the vehicle but can be ordered
under the number in parentheses. E.g.: bearing puller…
During assembly, non-reusable parts (e.g. self-locking screws and nuts, seals and seal rings, O-rings,
pins, lock washers) must be replaced by new parts.
In some instances, a thread locker (e.g. Loctite®) is required. The manufacturer instructions for use
must be followed.
After disassembly, clean the parts that are to be reused and check them for damage and wear. Change
damaged or worn parts.
After you complete the repair or service work, check the operating safety of the vehicle.
If you use your motorcycle responsibly, you can ensure that problems and conflicts do not occur. To
protect the future of the motorcycle sport, make sure that you use your motorcycle legally, display
environmental consciousness, and respect the rights of others. When disposing of used oil, other
operating and auxiliary fluids, and used components, comply with the laws and regulations of the
respective country.
Because motorcycles are not subject to the EU regulations governing the disposal of used vehicles,
there are no legal regulations that pertain to the disposal of an end-of-life motorcycle. Your authorized
Apollo dealer will be glad to advise you.
To Next Page
Loading...
