Take Apart Tools - 1
Tools
The following tools are recommended for procedures in this chapter:
• Spring hook removal tool (922-1547) to remove the processor
card
• Plastic screwdriver (922-3504) to release tabs on plastic housing
• Jeweler’s Phillips screwdriver, size 00 mm to remove CD-ROM
bezel
• CRT discharge tool
• Nut driver or pliers to remove thumbscrews on the audio/video
interconnect board
• Needlenose pliers
• Phillips screwdriver
• ESD mat
Note:
For additional take apart assistance, reference the iMac screw
matrix, located with the iMac exploded views.
To Next Page
Loading...
