Adjustments Display Adjustment Utility v. 1.1 - 26
Geometry Adjustments
• Save button - Clicking this button saves the adjustments you
have performed.
Note:
Adjustments (except for brightness and contrast) are
linked to the resolution that the display is currently using. If the
user changes the resolution, the adjustments will not apply to
the new resolution.
• Revert button- Clicking this button restores the display to the
last set of adjustments.
Note:
Once you save a set of adjustments, you cannot revert to
a previous set of adjustments.
• Factory Setting button - Clicking this button sets the
adjustments to pre-defined factory settings.
Note:
Brightness and Contrast adjustments will not be affected
by clicking the “Factory Setting” button. There is no pre-defined
factory setting for brightness and contrast.
To Next Page
Loading...
