Apple IMac - Testing the Modem

Troubleshooting Testing the Modem/ - 30
Testing the Modem
The iMac ships with ClarisWorks (a.k.a. AppleWorks) software,
which can be used to test the iMac modem connection. You should
run this test if the modem is not able to dial out. To perform this
test:
1. Locate and launch ClarisWorks. (Version 5.0 ships with the
iMac computer.)
2. From the ClarisWorks New Document window, select
Communications and click OK. You will be presented with an
untitled communications document.
3. Click on the settings menu item and select Connection from the
menu, which will bring up a new window. This window allows
you to select the communications toolbox device to access the
modem.