DRAFT
June 23, 2003 9:39 am, MFC_QSG_text.fm
Materials and Equipment
Applied Biosystems Micro Fluidic Card Getting Started Guide 7
Materials and Equipment
Components and
Storage
Conditions
The Micro Fluidic Card Upgrade consists of two kits, the 7900HT
Micro Fluidic Card Hardware Upgrade Kit (PN 4329012) and the
7900HT Micro Fluidic Card Chemical Installation Kit (PN 4340090).
The following tables list the components of each kit and, where
applicable, their storage conditions. The tables also list the part
numbers for kit components that are available for individual
purchase.
All Micro Fluidic Cards ship at ambient temperature. Store Micro
Fluidic Cards at the recommended temperature upon receipt.
7900HT Micro Fluidic Card Hardware Upgrade Kit (PN 4329012)
7900HT Micro Fluidic Card Chemical Installation Kit (PN 4340090)
Component Part Number
Applied Biosystems 7900HT Micro Fluidic Card Getting
Started Guide
4319399
Micro Fluidic Card Sample Block
(Also referred to as the thermal cycler module or thermal
block)
4329011
Micro Fluidic Card Sealer –
Sorvall/Heraeus Custom Buckets and Adaptors (4 pcs.) –
7900HT Heated Cover –
SDS 2.1 Software CD –
Component Part Number Storage
Calibration Micro Fluidic Card (2 pcs.) – ambient
Installation Micro Fluidic Card (12 pcs.)
(Also referred to as the TGF-β
Instrument Verification Card)
– 2–8 ° C
Spectral Calibration Kit, 96-Well 4328639 -15 to -25 ° C