AQUA SALT
+
MAINTENANCE AND INSTRUCTION MANUAL
Salt chlorine genera ENGLISH
ADSP7000753 rev. 5.0 09/07/2019 4/51
ADDENDUM – ADDITION OF SALT
NOTE FOR AQUASALT DEVICE WITH ELECTROLYTIC
CELL TO 200 mc
PROCEDURE FOR ADDITION OF SALT IN THE BALANCE TANK
OR IN SKIMMER
1. CHECK THE NEEDED QUANTITY OF SALT
2. SWITCH OFF THE DEVICE
3. ADD THE QUANTITY OF SALT RECOMMENDED
4. WAIT FOR DISSOLUTION OF SALT ADDED MAINTAINING THE
SYSTEM OF CIRCULATION ASSETS (12-24 HOURS)
5. TURN ON AGAIN THE DEVICE
6. CHECK THE SALINITY IS RETURNED TO NEEDED
VALUES
To Next Page
Loading...
