Why am I running out of hot water with my AQUATECH Heat Pump?
To address running out of hot water with your AQUATECH Heat Pump, consider these potential causes: * If you have high flow shower heads installed, a plumber can replace them or install water flow valves to reduce hot water usage. * If your system is on an off-peak tariff, switch to a continuous power supply tariff. * If the MODE is wrong, change it to HYBRID or HYBRID+.
What to do if my AQUATECH Heat Pump has noise issues?
To minimize noise from your AQUATECH Heat Pump, set the system to run between 7:00 am and 19:00 pm. If you suspect vibration in the refrigerant circuit or fan running noise, take a video and call 1300 769 904 to send to tech support for confirmation that the system is running according to specifications.
What to do if AQUATECH Heat Pump has no hot water because of the home’s tempering valve?
If the water from the PTR temperature is hotter than the temperature at your taps, there may be an issue with the home’s tempering valve. Contact your installing plumber to service or replace it.
Why AQUATECH Heat Pump has no hot water and shows fault alarm?
If the TANK temperature is showing above 70°C or displaying a fault alarm, turn the power off to your AQUATECH Heat Pump for 30 minutes to reset it. If the error continues when power is turned back on, call 1300 769 904 to arrange service.
How to solve issue with controller settings in AQUATECH Heat Pump that causes no hot water?
If there is an issue with the heat pump or controller settings of your AQUATECH Heat Pump, change the MODE to ELEMENT and call 1300 769 904 to arrange service.
What to do if AQUATECH Heat Pump is running out of hot water because system timers are set with too small a recovery period?
If system timers are set with too small a recovery period, contact us on 1300 769 904 to discuss timer options and modes for your AQUATECH Heat Pump.
Guidelines for safe installation and operation, including environmental considerations.
Warnings and procedures related to flammable refrigerant and materials.
Alerts on specific risks like hydrogen gas accumulation and hot surfaces.
Emphasizes qualified personnel for maintenance and safe work practices.
Safety protocols for working with refrigerant circuits and leak detection.
Guidelines for proper delivery, storage, and transport of the unit.
Details for cold water supply, hot water outlet, and condensate drain.
Essential checks before the initial startup of the heat pump.
Common causes and solutions for lack of hot water.
Reasons and fixes for insufficient hot water supply.
Details the 5-year system and 2-year labour warranty.
Definition of major failures and procedure for warranty claims.
General| Brand | AQUATECH |
|---|---|
| Model | RAPID/X6 |
| Category | Water Heater |
| Language | English |
To Next Page
