Revision Date – 22/12/2014 page 57
9.13 Device fuse (100-240V AC) - Replace
Remove the AC and DC power leads from the
power sockets.
Remove the fuse insert from the rear panel of the
fridge as shown.
HINT: A small flat blade screwdriver may be
required to help pry the insert away from
its housing.
Replace the defective fuse with a new fuse that
has the same rating. The correct rating for the
fuse is 4A, specified as: F4L250V.
Replace the fuse insert back into its housing
To Next Page
Loading...
