Revision Date – 17/08/2014 page 81
12.1 Definition of change:
Front control panel housing update – Jun-10
The housing change now incorporates a larger Touch Pad (p/n 10910041) and the Support – control panel has
been obsolete from the design. The larger touchpad can be modified/trimmed to fit earlier (refer serial number
breakpoint) fridges. The original touch pad (p/n 10910026) is NOT forward compatible with new fridges. Sufficient
quantities of inventory have been ordered to cater for service needs.
Circuit Board White LED display - Jan-11
The 47 Litre model was initially launched with a green LED display. When the new fridge range was developed we
decided a new bright white LED better suits the customer needs in all lighting conditions. The new white LED circuit
board is backward compatible with all ARB fridges. Note: do NOT use the green LED on 35, 60 or 78L fridge
models.
New DC cord with screw-in plug – Oct 2013
The original Fridge DC Lead with a Cig/Merit combination plug was replaced with a new Cig/Screw –In plug. The
screw-in plug is compatible with the ARB Screw-In DC socket. The new DC lead is backward compatible with all
ARB Fridges manufactured before October 2013. The original DC lead has been discontinued.
Remote Display Compatibility – Jan 2014
New Main and Display PCBs were introduced with the introduction of the ARB Remote display. The new PCBs are
not forward or backward compatible as the communication looms are different. It is not possible to upgrade an ARB
fridge manufactured prior to January 2014 to use these new PCB. When servicing fridges manufactured prior to
January 2014, the original parts numbers listed in section 4 must be used. At this time, a change was also made to
the PCBs so that the interior light will not operate unless the fridge is turned on using the ON/OFF button on the
front of the fridge.
To Next Page
Loading...
